Magicshine remote control suitable for headlight sets controlled with 2.4GHz frequency.

The remote control uses 1 pc. CR2025 included.

Fits to:

MJ-902

MJ-906

MJ-908

The remote control is paired to the headlight in the following steps.

1. Disconnect both headlight and taillight from the battery.

2. Hold both buttons on the remote control for a few seconds until the light in one button flashes faintly.

3. Connect the headlight to the battery.

4. Press the big button on the remote control.

5. The headlight will flash a few times to indicate successful pairing.

To connect the rear light, follow the following steps after pairing it with the front light.

1. Disconnect the headlight again.

2. Hold both buttons on the remote control for a few seconds until the light flashes weakly in one button.

3. Connect the taillight to the battery.

​​​​​​​​​4. Press the small button on the remote control.

​​​​​​​5. The backlight will blink a few times to indicate successful pairing.