An upgraded version of the smart and popular TreeFrog Pro 1. The biggest upgrade/advantage of this Plus model is that it comes with a universal fork mount. This means that you can use the same holder/bracket if you have different bikes with different wheel mountings. All it requires is that you buy the Plugsets that fit the bikes you need - these are sold separately.
The perfect choice if you want a bicycle rack on the roof, where other roof racks cannot be fitted due to a lack of roof bars. It can be mounted on all flat surfaces, including cars with glass roofs, such as the Tesla. However, the holder cannot be used on sunroofs that can be opened. The Pro holder can be used for everything from racing bikes to MTBs weighing up to 20 kg. Three suction cups hold the large bracket in place, while a single suction cup holds the rear wheel with a strong Velcro strap. Each suction cup can hold 110 kg. Once the suction cups are attached to the car, they hold well.
Works with both rim brakes and disc brakes.
How to mount the holder:
1. Remove the protective cover from the cups.
2. Clean the surface of the car as well as the suction cups with clean water with the provided microfiber cloth.
3. Moisten the edges of the suction cups with a little water and position the holder so that the front fork of the bicycle faces straight ahead and the rear wheel faces straight back.
4. The vacuum cups are installed and deflated one by one - from one side to the other. It is normal that the holder does not necessarily follow the roof of your car 100%.
5. Pump until the white band is no longer visible and see that it continues to hold tight. Service the suction cup if one of them cannot hold tightly.
6. Mount the bicycle's front fork in the holder at the front.
7. Place the suction cup under the rear wheel and mount it in the same way as the others.
8. Secure the rear wheel with the included Velcro strap.
9. Secure the pedal arm with the additional included Velcro strap.
Max speed with the holder on is 130 km/h. The speed over road bumps is 25 km/h.
The Pro 1 holder can be used with bicycles weighing up to 20 kg.
Note, if you need to transport an E-bike, you must use the Pro 2 or 3 model instead.
An upgraded version of the smart and popular TreeFrog Pro 1. The biggest upgrade/advantage of this Plus model is that it comes with a universal fork mount. This means that you can use the same holder/bracket if you have different bikes with different wheel mountings. All it requires is that you buy the Plugsets that fit the bikes you need - these are sold separately.
The perfect choice if you want a bicycle rack on the roof, where other roof racks cannot be fitted due to a lack of roof bars. It can be mounted on all flat surfaces, including cars with glass roofs, such as the Tesla. However, the holder cannot be used on sunroofs that can be opened. The Pro holder can be used for everything from racing bikes to MTBs weighing up to 20 kg. Three suction cups hold the large bracket in place, while a single suction cup holds the rear wheel with a strong Velcro strap. Each suction cup can hold 110 kg. Once the suction cups are attached to the car, they hold well.
Works with both rim brakes and disc brakes.
How to mount the holder:
1. Remove the protective cover from the cups.
2. Clean the surface of the car as well as the suction cups with clean water with the provided microfiber cloth.
3. Moisten the edges of the suction cups with a little water and position the holder so that the front fork of the bicycle faces straight ahead and the rear wheel faces straight back.
4. The vacuum cups are installed and deflated one by one - from one side to the other. It is normal that the holder does not necessarily follow the roof of your car 100%.
5. Pump until the white band is no longer visible and see that it continues to hold tight. Service the suction cup if one of them cannot hold tightly.
6. Mount the bicycle's front fork in the holder at the front.
7. Place the suction cup under the rear wheel and mount it in the same way as the others.
8. Secure the rear wheel with the included Velcro strap.
9. Secure the pedal arm with the additional included Velcro strap.
Max speed with the holder on is 130 km/h. The speed over road bumps is 25 km/h.
The Pro 1 holder can be used with bicycles weighing up to 20 kg.
Note, if you need to transport an E-bike, you must use the Pro 2 or 3 model instead.
TreeFrog Pro 1 Plus Bike Carrier with Universal Fork Mount
1 In stock* Free shipping over 100,00 €
