An upgraded version of the smart and popular TreeFrog Pro 2. The biggest upgrade/advantage of this Plus model is that it comes with a universal fork mount. This means that you can use the same holder/bracket if you have different bikes with different wheel mountings. All it requires is that you buy the Plugsets that fit the bikes you need - these are sold separately.
The smart bike holder from TreeFrog is easily and quickly mounted on the car with suction cups. It can be mounted on all flat surfaces, including also on cars with glass roofs, such as Tesla. However, the holder cannot be used on sunroofs that can be opened.
These are the perfect choice if you want a bicycle rack on the roof, where other roof racks cannot be fitted due to a lack of roof bars.
The Pro holder can be used with everything from racing bikes to MTBs weighing up to 20 kg. both with rim brakes and disc brakes. Or with a single E-MTB that weighs up to 27 kg.
Each suction cup can hold 110 kg. so once the suction cups are attached to the car, they stay firmly in place.
Four suction cups hold the large bracket in place, while a single suction cup for each bike holds the rear wheel with a strong Velcro strap.
How to mount the holder:
1. Remove the protective cover from the cups.
2. Clean the surface of the car as well as the suction cups with clean water with the included microfiber cloth.
3. Moisten the edges of the suction cups with lukewarm water and position the holder so that the front fork of the bicycle points straight ahead and the rear wheel points straight back.
4. The vacuum cups are mounted and deflated one by one, from one side to the other. It is normal that the holder does not necessarily follow the roof of your car 100%.
5. Pump until the white band is no longer visible and see that it continues to seal - Service the suction cup if one of them fails to seal.
6. Mount the bicycle's front fork in the holder at the front.
7. Place the suction cup under the rear wheel and mount it in the same way as the others.
8. Secure the rear wheel with the included Velcro strap.
9. Secure the pedal arm with the additional included Velcro strap.
Max speed with the holder is 130 km/h - the speed over road bumps is 25 km/h.
The Pro 2 holder can be used with bicycles weighing up to 20 kg. each - total load 40 kg.
Please note, if you have to transport an E-MTB, only 1 bicycle central placed on the holder may be transported. (weight up to 27 kg).
If you want to transport two E-MTBs, you must use the Pro 3 model.
An upgraded version of the smart and popular TreeFrog Pro 2. The biggest upgrade/advantage of this Plus model is that it comes with a universal fork mount. This means that you can use the same holder/bracket if you have different bikes with different wheel mountings. All it requires is that you buy the Plugsets that fit the bikes you need - these are sold separately.
The smart bike holder from TreeFrog is easily and quickly mounted on the car with suction cups. It can be mounted on all flat surfaces, including also on cars with glass roofs, such as Tesla. However, the holder cannot be used on sunroofs that can be opened.
These are the perfect choice if you want a bicycle rack on the roof, where other roof racks cannot be fitted due to a lack of roof bars.
The Pro holder can be used with everything from racing bikes to MTBs weighing up to 20 kg. both with rim brakes and disc brakes. Or with a single E-MTB that weighs up to 27 kg.
Each suction cup can hold 110 kg. so once the suction cups are attached to the car, they stay firmly in place.
Four suction cups hold the large bracket in place, while a single suction cup for each bike holds the rear wheel with a strong Velcro strap.
How to mount the holder:
1. Remove the protective cover from the cups.
2. Clean the surface of the car as well as the suction cups with clean water with the included microfiber cloth.
3. Moisten the edges of the suction cups with lukewarm water and position the holder so that the front fork of the bicycle points straight ahead and the rear wheel points straight back.
4. The vacuum cups are mounted and deflated one by one, from one side to the other. It is normal that the holder does not necessarily follow the roof of your car 100%.
5. Pump until the white band is no longer visible and see that it continues to seal - Service the suction cup if one of them fails to seal.
6. Mount the bicycle's front fork in the holder at the front.
7. Place the suction cup under the rear wheel and mount it in the same way as the others.
8. Secure the rear wheel with the included Velcro strap.
9. Secure the pedal arm with the additional included Velcro strap.
Max speed with the holder is 130 km/h - the speed over road bumps is 25 km/h.
The Pro 2 holder can be used with bicycles weighing up to 20 kg. each - total load 40 kg.
Please note, if you have to transport an E-MTB, only 1 bicycle central placed on the holder may be transported. (weight up to 27 kg).
If you want to transport two E-MTBs, you must use the Pro 3 model.
TreeFrog Pro 2 Plus Bike Carrier with Universal Fork Mount
2 In stock* Free shipping over 100,00 €
