Make punctures a thing of the past with the power of Silca Ultimate Tubeless Sealant with Fiberfoam! Recycled carbon fibers create a robust structure that seals even the largest punctures while maintaining long-lasting effectiveness.
Silca Ultimate Tubeless Fluid utilizes a foaming latex formula combined with chopped carbon fiber to enhance sealing performance - even at higher pressures. This unique liquid contains 5% recycled carbon fibers of 6, 9, and 12mm from recycled bicycles, carbon wheels, racing cars, and aircraft components.
An innovative foaming latex formula enables ultra-light carbon fibers to be distributed evenly in the liquid during driving. This enables a higher fiber content than is possible with Kevlar or fiberglass. At this high fiber load, bundles of carbon fibers are transported directly to the puncture by the fluid flow, where thousands of microbubbles collapse, depositing their rigid carbon fibers over the hole. This dam of high-strength fibers has proven to be able to seal holes of up to 7.5mm in tests, which is 25% larger than conventional technologies.
After the puncture is sealed, an area of the tire is left with a zone of carbon fiber-reinforced latex bridging the top and bottom of the hole, helping to reduce the likelihood of future punctures in that area.
It is recommended to add a refill every 90-120 days depending on the temperature. The refill can also be used to refill very porous tires during initial installation.
CO2 can be used temporarily to mount the tire, but should then be released and replaced with the air pump to preserve the life of the sealant.
SPECIFICATIONS:
- Effective down to -12C.
- Seals 7.5mm holes for up to 6 months.
- Must be poured into the tire during installation.
- Not compatible with injectors (It seals holes bigger than your valve).
- Use refill every 90-120 days for best performance.
- 6, 9 and 12mm recycled carbon fibers are evenly distributed by a foaming latex to create ultra-strong seals.
- CO2 can be used to mount the tires, but should be removed as soon as possible and replaced with air to preserve the life of the sealant.
Make punctures a thing of the past with the power of Silca Ultimate Tubeless Sealant with Fiberfoam! Recycled carbon fibers create a robust structure that seals even the largest punctures while maintaining long-lasting effectiveness.
Silca Ultimate Tubeless Fluid utilizes a foaming latex formula combined with chopped carbon fiber to enhance sealing performance - even at higher pressures. This unique liquid contains 5% recycled carbon fibers of 6, 9, and 12mm from recycled bicycles, carbon wheels, racing cars, and aircraft components.
An innovative foaming latex formula enables ultra-light carbon fibers to be distributed evenly in the liquid during driving. This enables a higher fiber content than is possible with Kevlar or fiberglass. At this high fiber load, bundles of carbon fibers are transported directly to the puncture by the fluid flow, where thousands of microbubbles collapse, depositing their rigid carbon fibers over the hole. This dam of high-strength fibers has proven to be able to seal holes of up to 7.5mm in tests, which is 25% larger than conventional technologies.
After the puncture is sealed, an area of the tire is left with a zone of carbon fiber-reinforced latex bridging the top and bottom of the hole, helping to reduce the likelihood of future punctures in that area.
It is recommended to add a refill every 90-120 days depending on the temperature. The refill can also be used to refill very porous tires during initial installation.
CO2 can be used temporarily to mount the tire, but should then be released and replaced with the air pump to preserve the life of the sealant.
SPECIFICATIONS:
- Effective down to -12C.
- Seals 7.5mm holes for up to 6 months.
- Must be poured into the tire during installation.
- Not compatible with injectors (It seals holes bigger than your valve).
- Use refill every 90-120 days for best performance.
- 6, 9 and 12mm recycled carbon fibers are evenly distributed by a foaming latex to create ultra-strong seals.
- CO2 can be used to mount the tires, but should be removed as soon as possible and replaced with air to preserve the life of the sealant.
Silca Ultimate Tubeless Liquid With Fiberfoam 236ml
10+ In stock* Free shipping over 100,00 €
